Dinitrol ML Cavity Protection 5 L

Dinitrol ML Cavity Protection 5 L

Characteristics:
• Brown
• Extremely Penetrating
• Stops ongoing corrosion
• Water displacing
• Oily, flexible film
• Wet in wet with bitumen UBC

Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles.

Method of use: DINITROL ML is applied by spraying with manual or semi-automatic. DINITROL application equipment, and is suitable for either air-mixed or airless spraying.

Technical properties:
Colour: brown
Type of film: oily, greasy
Density at 23°C: 860 kg/m³
Viscosity at 23°C, DIN 2: 60 s
Dry matter content: 46 % by weight
Flash point: 40°C
Aromatic content in solvent: < 1 %
Recommended film thickness wet: 30 μm
Recommended layer thickness: 10 μm
Drying time: 1 h
Low temperature adhesion: < - 40°C
Effect on car paint: none
Removability: White
Spirit Salt spray test: > 96 h
Penetration 50 μm gap: > 70 mm
Available in: 500 ML Spray can / 5 L Pail / 60 L Drum / Container

Warning
Gasoline fraction (petroleum), hydrogenated heavy Calciun Sulfonate
H226 Flammable liquid and vapour. H336 May cause drowsiness or dizziness
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P243 Take precautions against static electricity. P280 Wear protective gloves/protective clothing/goggles. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse the skin with water. P403+P233 Store in a well-ventilated place. Keep the package tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations
EUH 066 Repeated exposure may cause skin dryness or cracking. EUH 208 Contains Calcium Sulfonate. May cause an allergic reaction.