RAPTOR 2K Aerosol Protective Coating white 400ml

APTOR 2K Aerosol Protective Coating white 400 ml

RAPTOR 2K Aerosol Protective Coating is a two-component protective coating in a convenient aerosol format, providing an extremely durable and protective finish. Thanks to the unique “Activate-Shake-Spray” system, it allows for easy application without the need for professional equipment. This coating is ideal for protecting metal, plastic, wood, and concrete surfaces from damage, corrosion, chemicals, and UV radiation.

Features and Benefits:

• Two-component (2K) system for professional hardness and durability.
• Extreme protection against corrosion, UV radiation, and chemicals.
• High resistance to impacts, scratches, and abrasion.
• Easy aerosol application – no need for a spray gun or compressor.
• Water-resistant and chemical-resistant surface, suitable for indoor and outdoor use.
• White  matte finish for a professional, long-lasting look.

Applications:

• Protective coating for cars, trucks, off-road vehicles, motorcycles, and ATVs.
• Ideal for chassis, bumpers, side panels, bodywork, and cargo areas.
• Suitable for various surfaces: metal, plastic, wood, concrete, fiberglass, etc.
• Industrial, household, and hobby applications.

Technical Data:

• Volume: 400 ml
• Color: white (matte)
• Composition: Two-component polyurethane protective coating
• Activation: “Activate-Shake-Spray” system
• Drying Time: Touch dry in 30 minutes, fully cured in 7 days
• Usage: Indoor and outdoor surfaces

Step-by-Step Instructions:

Activation:

1. Remove the red cap from the top of the can.
2. Place the cap on the bottom of the can and press firmly to activate the hardener.
3. Shake the can vigorously for at least 2 minutes to thoroughly mix the components.

Surface Preparation:

1. Ensure the surface is clean, dry, and free of grease.
2. If necessary, lightly sand the surface and remove any dust.

Application:

1. Spray from a distance of 25-30 cm from the surface.
2. Apply 2-3 thin layers with an interval of 10-15 minutes between coats.

Drying Time:

• Touch dry after 30 minutes.
• Fully cured after 7 days.

Why Choose RAPTOR 2K Aerosol Protective Coating?

• Professional protection without the need for spray equipment.
• Ideal for repairs and protection in harsh conditions.
• UV, water, and chemical resistant.
• Perfect solution for long-term protection of vehicles, machinery, boats, and other equipment.

Hazards:

Contains: Reaction mass: α-Hydro-ω-{3-[3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl]propanoyloxy}poly(oxyethylene) and α-{3-[3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl]propanoyl}-ω-{3-[3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl]propanoyloxy}poly(oxyethylene), reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate, oligomers of hexamethylene diisocyanate.

Hazard Statements (CLP):

• H222 – Extremely flammable aerosol.

• H229 – Pressurised container: may burst if heated.

• H317 – May cause an allergic skin reaction.

• H319 – Causes serious eye irritation.

Precautionary Statements (CLP):

• P210 – Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.

• P211 – Do not spray on an open flame or other ignition source.

• P251 – Pressurised container: do not pierce or burn, even after use.

• P280 – Wear protective eyewear, clothing, and gloves.

• P337+P313 – If eye irritation persists, seek medical advice/attention.

• P410+P412 – Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

EUH Statements:

• EUH204 – Contains isocyanates. May cause an allergic reaction.

• EUH066 – Repeated exposure may cause skin dryness or cracking.