SikaGard 6250 ML Cavity wax transparent 1L

SikaGard®-6250 1l and 6250 500ml Spray - sprayable wax for anti-corrosion protection of cavities without solvents and aromatics

technical data:
chemical base wax with corrosion inhibitors without solvents
color milky transparent
dry curing mechanism
density (liquid) (ISO 12185) ca 0.87 kg/l
solids content (ISO 3251) approx. 47%
viscosity ( ISO 2431 ) approx. 30 s
application temperature 20°C to 30°C
surface drying time approx. 120 min
total curing time approx. 5 hours
temperature resistance (permanent -25°C to 160°C
shelf life (between +10°C and +30°C) 24 months

data at 23°C and 50% relative air humidity (layer thickness 100μm)

Description:
SikaGard®-6250 is a milky transparent sprayable durable wax without solvents and aromatics, for anti-corrosion protection of cavities with high capillary, protective anti-corrosion
and water repellency factor and self-healing ability.
SikaGard®-6250 is manufactured in accordance with ISO 9001/14001 quality systems.

Product advantages:
- without aromatics
- without fogging
- self-healing ability
- high temperature resistance
- high anti-corrosion protection
- does not drip during application
- resistant to leaching
- low odor after application

Fields of application:
SikaGard®-6210 penetrates perfectly into the capillary joints of the car body and acts as a water repellent. After curing, a transparent waxy solid smooth film with excellent anti-corrosion properties remains on the surface. The preparation also shows a protective self-recovery ability in places of minor damage. The preparation resists high temperature and can also be applied for the surface treatment of engine blocks. The product is intended for processing by professional and experienced users.
SikaGard®-6250 cannot be painted over.

Chemical resistance:
When cured, SikaGard®-6250 is resistant to water, seawater, salt water solutions, oils and weak acid concentrations. These data are due to
for a wide range of influencing materials and conditions only indicative. The binding assessment is conditioned by an object test.

Processing instructions:
Preparation of the substrate: treated surfaces must be clean, dry, without traces of fats, oils or other separating substances.
You can request detailed information on the use of the product from the supplier or from Sika's technical service.

Application
SikaGard®-6250 can be applied by spraying with low-pressure airless systems or low-pressure air guns with a pressure of approx. 3-6 bar. Before application, it is necessary to shake the can well
shake Apply at room temperature. Spray using flexible tube cavity ML systems or for external application from a distance of approx. 30 cm. Unprocessed spray must be tightly closed immediately after application.

Removal of residues
Fresh SikaGard®-6250 can be cleaned from soiled surfaces and tools before it hardens using Sika® Remover 208. Hardened material can only be removed mechanically. Hands can be cleaned using a Sika®Handclean towel or washing paste and rinsing with water.

Packaging:
can 1000 ml

For professional use only

Danger
Naphtha (petroleum), hydrogenated light; low-boiling hydrogenated gasoline fraction
H222 Extremely flammable aerosol. H229 Pressurized container: may burst when heated. H315 Irritating to skin. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic organisms, with long-term effects.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P211 Do not spray on open flames or other sources of ignition. P251 Do not puncture or burn even after use. P273 Avoid release to the environment.
P391 Collect spilled product.
P410 + P412 Protect from sunlight. Do not expose to temperature exceeding 50°C/ 122°F.