Dynacoat Clear 6000 HS AS 1 L

Clear 6000 HS AS is a first-class clear coat with a perfect appearance and also with a short drying time. This versatile clear coat can be used over water-based and solvent-based base coats for small and large repairs in a variety of conditions. For great results, just apply two coats of the product. Clear 6000 HS AS is easy to apply and polish.

MIXING RATIO
2 Clear 6000 HS AS
1 Flexi hardener
10-20% thinner/extra speed

PISTOL
Nozzle: 1.2 - 1.4 mm
Working pressure: 1.7 - 2.2 bar at the inlet

APPLICATION
2 x 1 layer
Apply first spill coat and then full coat

EVAPORATION TIME
5-10 minutes between coats
5 - 10 minutes before drying

DRYING TIME
20°C       60°C
Flexi Hardener Fast     4 hours 15 minutes

PRODUCT AND ADDITIVES Clear 6000 HS AS
Flexi fast hardener
Flexi hardener medium
Flexi Hardener Slow
Thinner fast
Thinner medium
Thinner slow

APPLICATION PROCEDURE Apply a closed spilled layer and let it evaporate for 5-10 minutes
at 20ºC (depending on hardener/thinner used). Then apply
the entire spilled layer and before that let it evaporate for 5 - 10 minutes at 20ºC
drying. The stated time can be significantly affected by the application conditions.

COATING THICKNESS 1 layer: 25 - 30 µm
Recommended application (2 layers): 45 - 60 µm

For professional use only

Warning
Flammable liquid and vapors.
It irritates the skin.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause drowsiness or dizziness.
May cause organ damage through prolonged or repeated exposure.
Harmful to aquatic organisms, with long-term effects.
Use protective gloves. Wear safety glasses or a face shield.
Protect from heat, hot surfaces, sparks, open flames and other sources
ignition. No smoking. Avoid release to the environment. Do not inhale
pairs. Wash your hands thoroughly after handling.
If you feel unwell, seek medical attention/treatment. WHEN INHALED:
If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER or
doctor. Remove contaminated clothing and wash before reuse. AT
SKIN CONTACT: Wash gently with plenty of water. In case of skin irritation or
rash: Get medical attention or treatment. EYE CONTACT: Several
minutes, rinse carefully with water. Remove contact lenses if worn and if
they can be removed easily. Continue rinsing. If eye irritation persists:
Seek medical attention or treatment.
Store in a well-ventilated place. Keep the package tightly closed. Keep it
in the cold.
Dispose of contents and packaging in accordance with all local, regional, national and
international regulations.

n-butyl acetate
Reaction mixture of ethylbenzene and xylene
bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate
Hydroxyphenyl-benzotriazole derivatives