We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.
Carsystem Etch Primer Spray 400ml
11,53 € /pcs
9,53 € excluding VAT
Etch primer primer
CHARACTERISTICS The Etch Primer is suitable for targeted use to touch up factory primers on aluminum bodies. It has the best adhesion properties on all steel, zinc and aluminum substrates. The Etch Primer is characterized by easy processing and quick drying.
AREA OF APPLICATION The Etch Primer can be used as an adhesion primer on all steel, zinc and aluminum substrates for spot and partial painting. Suitable for stripping sanded-through areas and restoring rust protection. The Etch Primer only offers limited adhesion for waterborne basecoats, in which case a 1K or 2K filler should be pre-coated.
PRODUCT DETAILS
MATERIAL DATA
V.O.C: 709.6 g/l
Shelf life in closed original container: at least 24 months
Density: 0.794 g/cm³
Colour: grey
Drying: 15 min/20°C
PROCESSING All surfaces to be coated must be cleaned and sanded. The damaged area must be free of grease, dust and dry. Clean the damaged area with silicone remover. Shake the can thoroughly for 2 minutes before use. Apply in thin layers.
NOTE Do not overwork with polyester products!!! It is essential to wear a breathing mask when processing!!!
SAFETY INSTRUCTIONS The above information, in particular the suggestions for the processing and use of our products are based on our knowledge and experience in normal cases. Due to the different materials, substrates and different working conditions, a guarantee of a work result or liability, from whatever legal relationship, cannot be based either on these instructions or on oral advice, unless we are guilty of intent or gross negligence falls. In this case, the user must prove that he has provided us with all the knowledge required for a proper and promising assessment in good time and in full in writing. Rights of third parties must be observed. Otherwise, our respective sales and delivery conditions apply. The latest technical data sheet applies, which should be requested by us.
For information on handling the products and disposal, please refer to the applicable safety data sheet and the relevant information sheets from the trade association for the chemical industry.
CHARACTERISTICS The Etch Primer is suitable for targeted use to touch up factory primers on aluminum bodies. It has the best adhesion properties on all steel, zinc and aluminum substrates. The Etch Primer is characterized by easy processing and quick drying.
AREA OF APPLICATION The Etch Primer can be used as an adhesion primer on all steel, zinc and aluminum substrates for spot and partial painting. Suitable for stripping sanded-through areas and restoring rust protection. The Etch Primer only offers limited adhesion for waterborne basecoats, in which case a 1K or 2K filler should be pre-coated.
PRODUCT DETAILS
MATERIAL DATA
V.O.C: 709.6 g/l
Shelf life in closed original container: at least 24 months
Density: 0.794 g/cm³
Colour: grey
Drying: 15 min/20°C
PROCESSING All surfaces to be coated must be cleaned and sanded. The damaged area must be free of grease, dust and dry. Clean the damaged area with silicone remover. Shake the can thoroughly for 2 minutes before use. Apply in thin layers.
NOTE Do not overwork with polyester products!!! It is essential to wear a breathing mask when processing!!!
SAFETY INSTRUCTIONS The above information, in particular the suggestions for the processing and use of our products are based on our knowledge and experience in normal cases. Due to the different materials, substrates and different working conditions, a guarantee of a work result or liability, from whatever legal relationship, cannot be based either on these instructions or on oral advice, unless we are guilty of intent or gross negligence falls. In this case, the user must prove that he has provided us with all the knowledge required for a proper and promising assessment in good time and in full in writing. Rights of third parties must be observed. Otherwise, our respective sales and delivery conditions apply. The latest technical data sheet applies, which should be requested by us.
For information on handling the products and disposal, please refer to the applicable safety data sheet and the relevant information sheets from the trade association for the chemical industry.
| Product code | 143028 |
|---|---|
| Brand | Carsystem |
Cookies
Cookie - Settings
Here you can customize your cookie settings according to your preferences.