The perfect primer for smooth and glossy paint surfaces. Closes all kinds of open-porous subsoils. DUPLI-COLOR Aerosol Art Primer forms the perfect basis for the following lacquering with DUPLI-COLOR Aerosol Art.
 

QUALITY AND PROPERTIES

• High-grade nitro-combi quality
• Especially high filling power
• Very good flow, smooth surface
• Quick-drying
• Protects from corrosion
• Promotes best adhesion of the top coat on the subsoil
• Optimizes the gloss of the top coat
• Grants the economical application of the top coat
• Especially user-friendly due to durable quality, which is easy to apply and easy to sand and re-coat
• For indoor and outdoor applications

PHYSICAL AND CHEMICAL DATA

• Colour: grey
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Degree of gloss:
  matt, 5-10 gloss units at measurement angle 60° acc. to DIN 67530
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 0,8 m² at covering layer
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 15 minutes
  Dry to touch: after approx. 30 minutes
  Can be sanded: after approx. 2-4 hours
• Size: Aerosol can, maximum nominal volume 400 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,