Dynacoat 1K Etch Primer 400ml

Dynacoat 1K ETCH Primer Spray

Fast-drying, universal, and semi-transparent primer suitable for use on metal surfaces before painting. Provides excellent adhesion and corrosion resistance.

Key Features:

• Dynacoat
• Fast-drying, universal, and semi-transparent primer
• Suitable for use on metal surfaces before painting
• Excellent adhesion and corrosion resistance

Application:

• Remove all traces of corrosion
• Sand the surface with P320, clean, and degrease
• Shake the primer thoroughly
• Apply 2–3 coats with 5–10 minutes between layers
• The primer can be painted over within 24 hours after drying
• Application temperature: 15–25 °C
• Do not apply if the surface is damp or dewy
• For detailed instructions, refer to the technical sheet

Recommended Substrates:

• Steel
• Galvanized steel
• Aluminum

For professional use only

Hazards:

• Extremely flammable aerosol.
• Pressurized container: may burst if heated.
• Causes serious eye damage.
• Causes skin irritation.
• May cause an allergic skin reaction.
• May cause drowsiness or dizziness.
• Harmful to aquatic life with long-lasting effects.
• Wear protective gloves.
• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• Do not pierce or burn, even after use.
• Wear protective goggles or a face shield.
• Protect from sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F.
• Acetone, Butan-1-ol, Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane]