Axalta Duxone DX1064 VOC Surfacer 1l

Description:
2K VOC compliant chromate-free sanding surfacer. Colour: grey. Composition based on functional acrylic copolymer.

Products:
DX1064 2K VOC Surfacer DX1024 HS Activator Fast DX1020 HS Activator DX32 Thinner Fast DX34 Standard Thinner

Substrates:
- OEM finishes.
- Cured repair finishes.
- Sanded putties.
- Primed steel, zinc galvanised steel and aluminium.
- DUXONE® 1K Wash Primer Filler DX1061.

Mixing ratio: 4:1

Surface preparation:
- Before applying DX1064, clean the surface, sand and degrease properly.
- Treat bare metal spots with 1 coat of wash primer or DUXONE® 1K Wash Primer Filler DX1061.

Equipment cleaning:
Use a correct solventborne gunwash

Remarks
- Do not use activated DX1064 beyond the pot life nor reduce it further to get viscosity down again.
- If DX1064 is applied over thermoplastic acrylic finishes, complete panel or overall car has to be treated. Spot repairing or sand throughs of the filler can result in spot marking or lifting when applying a basecoat.
- Do NOT exceed recommended film thickness to avoid film defects, poor film through cure and poor adhesion.
- Respect mixing ratios, drying times, spray pressure and DFT to avoid poor sandability and paperfilling.
- Activated material should not be returned to original can of non-activated material.
- Close can of activator tightly immediately after use, as this product will react with humid air and water and lose its hardening effect.
- Material has to be at room temperature (18-25°C) before use.

Product data Package viscosity: 2500-3000 cp (at 5 rpm) 900-1200 cp (at 20 rpm)
Theoretical coverage: 5.5-5.8 m²/l at 80 µ DFT - ready-to-spray
Directive 2004/42/EC: The EU limit value for this product (product category: IIB(c)) in ready to use form is maximum 540 g/l of VOC. The VOC content of this product in ready to use form is maximum 540 g/l.