QUALITY AND PROPERTIES

• High dissolving properties
• Leaves no residue
• Non-conductive
• Non-corrosive
• Misty spray pattern

PHYSICAL AND CHEMICAL DATA

• Basis: Aliphatic Hydrocarbons
• VOC-content: 100% w/w
• Colour: transparent
• Smell: characteristic
• Relative density at 20°C: 0.78 g/ml
• Yield: 1.11 g/sec.
• Vapour pressure at 20°C: 3 - 4 bar
• Refractive index at 20°C: 1.434 
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  aerosol can, maximum nominal volume 500 ml

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Application:

• Bring can to room temperature.
• Operating temperature 5° to 30°C.
• Make sure that the engine has cooled down, first. Cover live parts and turn off electrical equipment before applying.
• Shake for 2 minutes before use.
• Evenly spray onto the surface to be treated. Clean stubborn dirt with a brush.
• Leave the engine cleaner to work for a few minutes then rinse with water.
• Separate water from oil with an oil separator, then dispose of waste as chemical waste.
• Blow dry live parts with an air gun after cleaning.

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!