Motip Putty with fiberglass 1000 g

Fill deeper damage like holes in surfaces of steel, aluminium, wood, concrete and polyester with MOTIP 2-component Glass Fibre Putty (filled). Glass Fibre putty is easy to sand and has excellent filling properties. Glass Fibre putty offers high impact resistance and may be resprayed with all paints. It is resistant to chemicals and the weather and can be applied in layers up to 2 cm in thickness.

CHARACTERISTICS
Easy to sand
Excellent filling properties
High impact resistance
Re-sprayable with all lacquer systems
Resistant to chemicals and weather influences
Excellent adhesion

USAGE INSTRUCTIONS
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY
Processing temperature 15 – 25°C.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface
Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sand and when desired apply a fine putty.
The drying time depends on the ambient temperature
After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

· Signal word Danger
· Hazard-determining components of labelling:
styrene
· Hazard statements
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H361d Suspected of damaging the unborn child.
H372 Causes damage to the hearing organs through prolonged or repeated exposure.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P235 Keep cool.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves / eye protection.
P314 Get medical advice/attention if you feel unwell.
P405 Store locked up.
P501 Dispose of contents / container in accordance with regional regulations