SikaFlex 529 AT Evolution 290ml/350g black

Sikaflex®-529 AT black
Sprayable sealant for vehicle bodies

Product advantages

Recoatable with water-based paints wet (wet-on-wet) even after the formation of "skin". Compatible with most commonly used coating systems. Can be applied by spraying or in the form of a caterpillar, excellent incorporation with a trowel or brush. Simple application, reproduces the original production appearance

Fast curing, spraying without overspray, good thixotropy (non-drip). Simple, clean and trouble-free application. Permanently flexible and resistant to aging. Long-term resistant to water, weather conditions and vibrations.

General advantages of advanced hybrid technology.

Good adhesion to a wide range of substrates, without the use of primer Robust and safe adhesion with minimal pre-treatment of the substrate and thus faster application. Excellent application properties (eg short tear-off) easy, fast and clean application. Improved extrudability easier application with a hand gun. Excellent workability at low and high temperatures reducing time and effort. Odorless, solvents, isocyanates, PVC and silicones environmentally friendly. Resistant to aging and weather conditions better cosmetic appearance.

Technical data
chemical base: silane-based polymer
color (CQP1) 001-1): black, ocher
curing mechanism: air humidity
density (before curing) (CQP 006-4): approx. 1.3 kg / l (depending on color)
application temperature: 5 ° C to 40 ° C
surface skin formation time (CQP 019-1): approx. 20 min at 23 ° C and 50% relative humidity
open time (CQP 526-1): approx. 15 min
curing speed (CQP 049-1): see diagram
volume shrinkage (CQP 014-1): approx. 3%
Shore A hardness (CQP 023-1 / ISO 868): approx. 30
tensile strength (CQP 036-1 / ISO 37): approx. 1 N / mm2
elongation at break (CQP 036-1 / ISO 37): approx. 200%
tensile strength (CQP 045-1 / ISO 34) approx. 2 N / mm
glass transition temperature (CQP 509-1 / ISO 4663): approx. - 50 ° C
temperature resistance (CQP 513-1): 4 hours - 120 ° C, 1 hour - 140 ° C
shelf life below 25 ° C (CQP 016-1): cartridge 15 months, bag 12 months

Description
Sikaflex®-529 AT is sprayable, a low-component, moisture-curing elastomer-curing PUR hybrid-based sealant for sealing joints, especially car bodies. Sikaflex®-529 AT is based on Sika / silane polymer technology and does not contain any isocyanates. Sikaflex®-529 AT is manufactured in accordance with
with ISO 9001 and 14001 quality standards and in accordance with the «Responsible Care» program.

Product advantages:
- advanced hybrid technology
- good adhesion to a wide range of substrates, without the use of a primer
- fast curing
- excellent workability, seam sealing without overspray
- reproduces the original production look
- can be applied by spraying, brush or in the form of a caterpillar
- immediately "wet" repaintable
- good acoustic and mechanical damping properties
- resistant to aging and weather conditions
- low odor
- without solvents and isocyanate
- without PVC and silicone

Fields of application
Sikaflex®-529 AT is intended for sealing interlaced joints of thin parts, part edges and internal welds, especially during body work. Sikaflex®-529 AT improves protection against mechanical damage and corrosion. For Sikaflex®-529 AT, suitable base materials are metal, base
or topcoats, plastics. This product is only suitable for professional users. Prior to application, it is necessary to perform adhesion tests with current materials and conditions.

Curing mechanism
Sikaflex®-529 AT cures by reaction with air humidity. At lower temperatures, the moisture content of the air is lower and the curing reaction proceeds more slowly.

Chemical resistance
Sikaflex®-529 AT, when cured, is resistant to water, seawater, water-miscible cleaning agent, short-term resistant to fuels, mineral oils, as well as vegetable and animal fats and oils; Sikaflex®-529 AT is not resistant to solvents, thinners, organic acids, alcohol and some other aggressive materials. These data are for guidance only due to the wide range of influencing materials and conditions. Mandatory assessment is conditioned by an object test.

Processing instructions
Preparation of documents
The surfaces of the part must be clean, dry, free of grease, oil, wax or other release agents. Surface adhesion can be increased by cleaning and activating Sika®Cleaner 205.

Monoports: Before inserting into the Sika®Jetflow gun, the clip must be cut off, the nozzle adapter fitted and screwed on according to the marked starting position.
spray head, connect the air supply. Air pressure at least 5 bar, open both valves. Apply the sealant to the sealed joint with a gun. See also our Sika® Jetflow Gun Operating Instructions. Open unprocessed sealant can only be stored for a short time. Do not apply below 5 ° C or above 40 ° C. The optimal material temperature of the part is between + 15 ° C and + 25

Finishing job
Sikaflex®-529 AT can be applied with a brush or trowel after application. Finishing work must be carried out within the open time of the sealant. We recommend the use of smoothing