We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.
CarSystem Rallye Spray Premium black matt 500 ml
6,78 € /pcs
5,60 € excluding VAT
Rallye-Spray Premium paint spray - matt black
CHARACTERISTICS Rallye Spray PREMIUM is a quick-drying, polishable, weather-resistant paint spray based on nitrocombi. Rallye Spray PREMIUM has excellent adhesion properties and very good opacity on almost all surfaces.
OPERATION AREA . Rallye Spray PREMIUM is a universal paint spray for all painting work. For touching up damaged areas in the paintwork.
PRODUCT DETAILS
Scope of application:
Recommended for: Touch-up work and part painting
Suitable substrates: - metals. Pre-treat with a suitable primer beforehand in the case of high requirements in terms of mechanical stress and corrosion protection, and particularly in the case of critical substrates such as aluminum or galvanized surfaces.
- Wood
- glass, ceramics
- Various plastics. Check compatibility and adhesion in an inconspicuous place beforehand. If necessary, prime with a suitable plastic adhesion promoter.
Not suitable for substrates made of polyvinyl chloride (PVC), polystyrene (PS), polyethylene (PE), polypropylene (PP) and blends thereof (e.g. PP/EPDM)
ATTENTION! Do not coat any safety-relevant plastic parts such as crash helmets.
Do not paint on substrates coated with synthetic resin paints.
Material data:
Colour: matt black
Specific weight: 0.75 g/cm³
Volume solids: 25%
VOC value: 2004/42/IIB (e)(840) <840 g/l aerosol including propellant)
Degree of gloss: < 10 units at a 60° angle
Drying: The specified drying times refer to a dry film layer thickness of 40 µm and an ambient temperature of 20°C.
Dust-dry: 15 minutes (dryness level 1 according to DIN 53150)
Touch test: 40 minutes (dryness level 3 according to DIN 53150)
Polishability: 6 hours
Recoatable (20°C): 15 minutes
Theoretical coverage: 500 ml = 1.625 m²
Storage stability: 5 years
The specification of the usability refers to an unused can when properly stored between 15 - 25°C and a rel. Humidity not over 60%. The can must be stored and transported upright, dry and protected from chemical and mechanical influences. The safety instructions on the can and all legal regulations of the storage location must be observed.
PROCESSING
Surface preparation: Clean the surface of dirt and grease, then derust. Treat any pore rust with rust remover. Fill and sand uneven surfaces. If no filling is required, spray on primer. Otherwise apply filler to the finely ground spatula surface. The repair area must be masked off generously beforehand. For larger areas, it is advisable to mask off the folds and edges of the body.
Sand the dried filler coat with P 400 sandpaper.
Painting: Before using the spray can, carefully read and observe the warning texts! Shake the can well for 2 minutes before use. Test spray, check colour. The spraying distance should be approx. 15 - 20 cm. Spray coats: 2 spray coats. Observe 5 - 10 min flash-off time between 2 spray coats. One spray coat corresponds to a dry film thickness of approx. 20 µm. Then spray the top coat in several thin coats at intervals of 3 - 5 minutes onto the dry repair area.
Further processing: Can be polished with commercially available polishes after approx. 6 hours of drying. Can be painted over with itself at any time. If required, can be painted over with commercially available 1K or 2K clear coats.
End of work: After finishing the painting process, turn the can over and spray the valve empty.
NOTES Tank is under pressure. Protect from temperatures above 50 °C.
SAFETY INSTRUCTIONS The above information, in particular the suggestions for the processing and use of our products are based on our knowledge and experience in normal cases. Due to the different materials, substrates and different working conditions, a guarantee of a work result or liability, from whatever legal relationship, cannot be based either on these instructions or on oral advice, unless we are guilty of intent or gross negligence falls. In this case, the user must prove that he has provided us with all the knowledge required for a proper and promising assessment in good time and in full in writing. Rights of third parties must be observed. Otherwise, our respective sales and delivery conditions apply. The latest technical data sheet applies, which should be requested by us.
For information on handling the products and disposal, please refer to the applicable safety data sheet and the relevant information sheets from the trade association for the chemical industry.
CHARACTERISTICS Rallye Spray PREMIUM is a quick-drying, polishable, weather-resistant paint spray based on nitrocombi. Rallye Spray PREMIUM has excellent adhesion properties and very good opacity on almost all surfaces.
OPERATION AREA . Rallye Spray PREMIUM is a universal paint spray for all painting work. For touching up damaged areas in the paintwork.
PRODUCT DETAILS
Scope of application:
Recommended for: Touch-up work and part painting
Suitable substrates: - metals. Pre-treat with a suitable primer beforehand in the case of high requirements in terms of mechanical stress and corrosion protection, and particularly in the case of critical substrates such as aluminum or galvanized surfaces.
- Wood
- glass, ceramics
- Various plastics. Check compatibility and adhesion in an inconspicuous place beforehand. If necessary, prime with a suitable plastic adhesion promoter.
Not suitable for substrates made of polyvinyl chloride (PVC), polystyrene (PS), polyethylene (PE), polypropylene (PP) and blends thereof (e.g. PP/EPDM)
ATTENTION! Do not coat any safety-relevant plastic parts such as crash helmets.
Do not paint on substrates coated with synthetic resin paints.
Material data:
Colour: matt black
Specific weight: 0.75 g/cm³
Volume solids: 25%
VOC value: 2004/42/IIB (e)(840) <840 g/l aerosol including propellant)
Degree of gloss: < 10 units at a 60° angle
Drying: The specified drying times refer to a dry film layer thickness of 40 µm and an ambient temperature of 20°C.
Dust-dry: 15 minutes (dryness level 1 according to DIN 53150)
Touch test: 40 minutes (dryness level 3 according to DIN 53150)
Polishability: 6 hours
Recoatable (20°C): 15 minutes
Theoretical coverage: 500 ml = 1.625 m²
Storage stability: 5 years
The specification of the usability refers to an unused can when properly stored between 15 - 25°C and a rel. Humidity not over 60%. The can must be stored and transported upright, dry and protected from chemical and mechanical influences. The safety instructions on the can and all legal regulations of the storage location must be observed.
PROCESSING
Surface preparation: Clean the surface of dirt and grease, then derust. Treat any pore rust with rust remover. Fill and sand uneven surfaces. If no filling is required, spray on primer. Otherwise apply filler to the finely ground spatula surface. The repair area must be masked off generously beforehand. For larger areas, it is advisable to mask off the folds and edges of the body.
Sand the dried filler coat with P 400 sandpaper.
Painting: Before using the spray can, carefully read and observe the warning texts! Shake the can well for 2 minutes before use. Test spray, check colour. The spraying distance should be approx. 15 - 20 cm. Spray coats: 2 spray coats. Observe 5 - 10 min flash-off time between 2 spray coats. One spray coat corresponds to a dry film thickness of approx. 20 µm. Then spray the top coat in several thin coats at intervals of 3 - 5 minutes onto the dry repair area.
Further processing: Can be polished with commercially available polishes after approx. 6 hours of drying. Can be painted over with itself at any time. If required, can be painted over with commercially available 1K or 2K clear coats.
End of work: After finishing the painting process, turn the can over and spray the valve empty.
NOTES Tank is under pressure. Protect from temperatures above 50 °C.
SAFETY INSTRUCTIONS The above information, in particular the suggestions for the processing and use of our products are based on our knowledge and experience in normal cases. Due to the different materials, substrates and different working conditions, a guarantee of a work result or liability, from whatever legal relationship, cannot be based either on these instructions or on oral advice, unless we are guilty of intent or gross negligence falls. In this case, the user must prove that he has provided us with all the knowledge required for a proper and promising assessment in good time and in full in writing. Rights of third parties must be observed. Otherwise, our respective sales and delivery conditions apply. The latest technical data sheet applies, which should be requested by us.
For information on handling the products and disposal, please refer to the applicable safety data sheet and the relevant information sheets from the trade association for the chemical industry.
| Product code | 149218 |
|---|---|
| EAN | 4102871492185 |
| Brand | Carsystem |
Cookies
Cookie - Settings
Here you can customize your cookie settings according to your preferences.