Dupli-Color 707193 Iron Mica Graphit Spray 400 ml

DUPLI-COLOR IRON MICA SPRAY is a protective coat against corrosion, a primer and a final coat in one go. Gives old, shabby metals an attractive and durable, satin glossy shine.

For metal exposed to corrosion (iron, steel sheet), e.g. garden fences, gates, banisters, gardening tools, playground devices (e.g. swings) and many others. Suitable for interior and exterior applications.

Even applicable on wood, stone or glass.

QUALITY AND PROPERTIES

• High-grade synthetic quality
• Very good rust-protective properties, no primer necessary
• Very good coverage amd adhesioExcellent adhesion
• Quick-drying
• Good flow, smooth surface
• Weather-resistant, light-proof, UV-resistant
• It is possible, but not necessary, to apply a top coat with synthetic paint

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: alcyd resin
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  satin matt, not measurable due to rough texture
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 0.8 - 1.0 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 20 minutes
  Dry to touch: after 2 hours
  Cured: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans with maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Preparation of the ground:

• Carefully remove loose parts of old paintings and rust.
• Then sand and remove dust.
• The ground has to be clean, dry and free from fat.

Lacquering:

• Cover areas not to be painted.
• Before use, shake the can vigorously for 3 minutes.
• Test spray to check colour-matching and compatibility.
• Spray several thin coats n 2 minute intervals.
• After every applied coat, shake the can again, because the special pigments will sediment rather quickly. This might lead to colour deviations.
• Spray from a distance of approx. 25 cm.
• Best results will be achieved at temperatures around 20°C.

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Signal word: Danger
Hazardous components for labeling:
acetone
Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclenes, aromatics (2-25%)
Naphtha (petroleum), hydrotreated heavy
2-Methoxy-1-methylethyl acetate
Standard hazard statements
H222-H229 Extremely flammable aerosol. The container is under pressure: it may rupture when heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
Instructions for safe handling
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on a naked flame or any incandescent material.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P280 Wear protective gloves / eye protection.
P284 In case of insufficient ventilation, wear respiratory equipment.
P302 + P352 IF ON SKIN: Wash with soap and plenty of water.
P312 Call a POISON CENTER / doctor if you feel unwell.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 ° C.
P501 Dispose of contents / container in accordance with local regulations.
More information:
EUH066 Repeated exposure may cause skin dryness or cracking.
EUH208 Contains butanone oxime. May produce an allergic reaction.
Without adequate ventilation, explosive mixtures may be formed.