High-gloss effect spray, which gives a long-term look similar to polished gold resp. chrome to smooth surfaces. Suitable for all smooth surfaces like metal, wood, glass and many coatable plastics.

Absorbant surface should be primed with  DUPLI-COLOR Aerosol Art Primer, e.g. art.no. 158995 before applicaton of DUPLI-COLOR Aerosol Art Effect Spray.
 

QUALITY AND PROPERTIES

• High-grade acrylic quality
• Resistant to water and common houshold cleansers.
• Not weather resistant.
• Not resistant to abrasion, therefore not suitable to spray on objects for daily use.
• Effect of gloss can change by intense rubbing or wiping.
• Colour of contents similar to cap
• Very good coverage
• Very high gloss
• Excellent adhesion
• Quick-drying
• Good flow, smooth surface

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Acrylate co-polymeres
• Colour: gold resp. chrome
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  not measurable, >100
• Efficiency:
  Depending on consistence and colour of the ground:
  400 ml are sufficient for approx. 1.2 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 60 minutes
  Cured: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

• The ground has to be clean, dry and free from rust and fat.
• Absorbant surfaces have to be primed with DUPLI-COLOR Primer
• Mask off areas not to be painted.
• Before use, shake can for 3 minutes.
• Test spray at an invisible spot.
• Spray from a distance of 20 - 30 cm.
• Spray in 2 minute intervals several thin coats.
• Important: Due to technical reasons it is not possible to conserve the excellent high gloss. A coating with clear lacquer would etch the effect painting. The only possibility to renew the gloss is to apply a new coat of the effect spray.
• Do not spray over surfaces which are painted with synthetic resin lacquer!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Danger: xylene H222-H229 Extremely flammable aerosol. The container is under pressure: it may burst when heated. H315 Irritating to skin. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure. P101 If medical attention is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P211 Do not spray on open flames or other sources of ignition. P251 Do not puncture or burn even after use. P260 Do not breathe aerosols. P280 Wear protective gloves / goggles. P284 In case of insufficient ventilation, use respiratory protection. P302+P352 IF ON SKIN: Wash with soap and plenty of water. P312 Call a POISON CENTER/doctor if you feel unwell. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C. P501 Dispose of contents / container in accordance with local regulations. Explosive mixtures can form without sufficient ventilation.