Grey is currently THE trend colour for house and apartment design. Especially shower walls, floors, living walls and much more is currently being designed with exposed concrete, micro-cement or other concrete-look coverings. Small accessories, such as vases or soap dispensers, in the same look, complement these rooms perfectly. Here you will achieve fast and optimal results with our new DUPLI-COLOR CEMENT series.

For applications on all kinds of surfaces. Depending on layer thickness, it is possible to achieve different drying-contures, like real cement. By spraying a last fine mist, it´s even possible to achieve a mineral feel. Please use mat clear coat for outdoor using. Available in Hoover dark and Assuan light.

 

QUALITY AND PROPERTIES

• Polystyrene-resistant acrylic lacquer with a special solvent
• Very good coverage
• Excellent adhesion on many materials, e.g. polystyrene, metal, wood, glass, caramics, eternite, concrete, stone, paper, cardboard, coatable hard plastics, flowers etc.
• Good flow, smooth surface
• Dries quick and evenly
• Suitable for painting and repairing indoors and outdoors objects
• Resistant to wiping
• Weather-resistant, light-proov, UV-resistant
• Scratch-, bump- and shock-proof

PHYSICAL AND CHEMICAL DATA

• Basis: Acrylate co-polymeres
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  structure: not measurable
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 1,0 m² depending on colour
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 30 minutes
  Cured: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

• Remove rust and dirt.
• The ground has to be clean, dry and free from fat.
• Possibly existing old paintings and smooth surfaces have to roughened with fine sand paper.
• Mask off areas not to be painted.
• Before use, shake can for 3 minutes.
• Test spray at an invisible spot.
• Spray from a distance of approx. 25 cm several thin coats.
• Do not spray over surfaces which are painted with synthetic resin lacquer!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Signal word Danger · Hazard statements H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H411 Toxic to aquatic life with long lasting effects. · Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe spray. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents / container in accordance with regional regulations. · Additional information: EUH208 Contains n-butyl methacrylate. May produce an allergic reaction. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Buildup of explosive mixtures possible without sufficient ventilation