This high-gloss effect spray gives a long-term look similar to polished gold resp. chrome or copper to smooth surfaces. Not weather-resistant. Not resistant to abrasion, therefore not suitable to spray on objects for daily use.

Suitable for all smooth surfaces like metal, wood, glass and many coatable plastics. Indispensable for constructors of fair booths, decorators, florists etc., but also for handicrafts at home, in courses and seminars.
 

QUALITY AND PROPERTIES

• High-grade acrylic quality
• Resistant to water and common houshold cleansers.
• Effect of gloss can change by intense rubbing or wiping.
• Colour of contents similar to cap
• Very good coverage
• Very high gloss
• Excellent adhesion
• Quick-drying
• Good flow, smooth surface

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Acrylate co-polymeres
• Colour: gold, chrome resp. copper
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  not measurable, >100
• Efficiency:
  Depending on consistence and colour of the ground:
  150 ml are sufficient for approx. 0.5 m²
  200 ml are sufficient for approx. 0.6 m²
  400 ml are sufficient for approx. 1.2 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 60 minutes
  Cured: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 150 ml, 200 ml or 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Applicaton

• The ground has to be clean, dry and free from rust and fat.
• Absorbant surfaces have to be primed with DUPLI-COLOR Universal Primer
• Mask off areas not to be painted.
• Before use, shake can for 3 minutes.
• Test spray at an invisible spot.
• Spray from a distance of 20 - 30 cm.
• Spray in 2 minute intervals several thin coats.
• Important: Due to technical reasons it is not possible to conserve the excellent high gloss. A coating with clear lacquer would etch the effect painting. The only possibility to renew the gloss is to apply a new coat of the effect spray.
• Do not spray over surfaces which are painted with synthetic resin lacquer!

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Signal word: Danger
Hazard-determining components of labelling:
xylene
Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe spray.
P280 Wear protective gloves / eye protection.
P284 In case of inadequate ventilation wear respiratory protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P312 Call a POISON CENTER/doctor if you feel unwell.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents / container in accordance with regional regulations.
Additional information:
Buildup of explosive mixtures possible without sufficient ventilation.