QUALITY AND PROPERTIES

• High-quality acrylic coat
• Fast drying time
• Useful for identifying pores, cracks and sanding marks
• Very fine atomisation ensures reliable results

PHYSICAL AND CHEMICAL DATA

• Basis of binder: Acrylic
• Colour: black
• Smell: solvent
• Substrate:
  very good dried and polished putties, primer or filler areas
• Temperature resistance: to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  Aerosol cans, maximum nominal volume 400 ml
• VOC-value: 257,5g

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

• No special preparation required before applying ColorMatic guide coat black
• Shake the can well for 2 minutes
• Carry out spray test
• When using dark fillers/ primer fillers, we recommend using ColorMatic primer filler HG1, No. 856 532, know as guide coat white
   
• For professional use only
• Wear an appropriate respirator (recommended type A2/P3)

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,