ColorMatic 1K Epoxy Primer 400ml

ColorMatic 1K Epoxy primer is an all-purpose 1K primer that provides excellent adhesion and corrosion prevention on sheet steel, zinc-coated steel, aluminium and anodised aluminium. It is fast drying with good flow and can be applied wet-on-wet. It also offers good insulation against humidity.

It is best to pre-clean metal surfaces thoroughly with silicone remover no. 174469, for fibreglass surfaces use plastic cleaner no.190261. For best corrosion-protection, we recommend using the ColorMatic 2K epoxy primer.

Applications:
Spot repair and refinishing parts.

QUALITY AND PROPERTIES
Excellent adhesion and corrosion protection for steel, galvanized steel, aluminium and fibreglass
Simple, time-saving application
Fast drying
Good flow
Recoat with ColorMatic pre-fill base paints and RAL-acrylic topcoats
Good insulation against moisture
Wet-on-wet application possible

PHYSICAL AND CHEMICAL DATA
Basis of binder: Epoxy resin
Colour: grey
Smell: solvent
Efficiency: 1 m²

Substrate:
blank metal sanded, zinc coated cleaned and sanded, aluminium, enodized aluminium, stainless steel, old paints cleaned and sanded, glass fiber materials cleaned and sanded, plastic substrates first priming with ColorMatic 1K Plastic Adhesive
Drying time (at 20°C, 50% relative air humidity):
Dust dry: 5 min
Dry to touch: 15 min
Hard dry: 30 min
Sandable: approx. 20 min
Coatable: 12-15 min 
Temperature resistance: to 90 °C
Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
Aerosol cans, maximum nominal volume 400ml
VOC value: 274,5g

APPLICATION
Remove all rust from metal surfaces
Clean surface with ColorMatic silicone remover no. 174469, then sand
Clean glassfibre surfaces with ColorMatic Plastic Cleaner antistatic no. 190261
Shake the can well for 2 minutes
Carry out test spray
Damaged area must be free of grease, dust and dry
For professional use only

Wear an appropriate respirator (recommended type A2/P3)