ColorMatic 1K spray filler 400ml

ColorMatic 1K spray filler has an extremely high filling capacity and stability. Ideal for leveling larger irregularities on sanded surfaces. Very good adhesion on polyester filler, plastic, and metal.

Application area:

Ideal for spot and partial painting.

Quality and properties:

• Extremely high filling capacity and stability

• Very good adhesion on polyester filler, plastic, and metal

• Simple and time-saving application

• Fast drying

• Good flow

• Not recoatable with 1K filler primer HG1 and HG7

Physical and chemical data:

• Binder base: Acrylic resin

• Color: Beige

• Odor: Solvent

• Coverage: 1.25 - 1.75 m³

• Substrate: Bare steel sheet, sanded, replacement part primer, sanded, cured paint, sanded, polyester substrates, sanded

• Drying (at 20°C, 50% relative humidity):

  • Dust dry: 5 min

  • Touch dry: 15-20 min

  • Sandable: 60 min

  • Fully dry: 60 min

  • Recoatable: 60 min

• Temperature resistance: Up to 110°C

• Durability/Storage: 24 months when stored properly (=10°-25°C, max. 60% relative humidity)

• Packaging/Content: Aerosol cans, maximum nominal volume 400 ml

• VOC value: 240.1 g

Instructions for use:

Before use, always read and follow the warning texts carefully!

Application:

• Completely remove rust from the damaged area, clean and sand the surface thoroughly

• The damaged area must be grease-free, dust-free, and dry

• Shake the can thoroughly for 2 minutes

• Test spray

• Note: After sanding, thoroughly clean the surface with a water-based cleaner. Do not use solvent-based cleaners.

• For professional use only

• Wear a suitable respirator (recommended type A2/P3)

Warning word: Danger

Hazardous components for labeling: xylene, n-butanol
Hazard statements:
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long-lasting effects.

Precautionary statements:
P101 If medical advice is needed, have the product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosols.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container in accordance with local regulations.

Additional information:
Without adequate ventilation, explosive mixtures may form.
EUH211 Warning! Dangerous respirable droplets may be formed when sprayed. Do not breathe aerosol or mist.