We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.
Dinitrol ML Spray 500ml
8,93 € /pcs
7,38 € excluding VAT
Super penetratindg corrosion prevention. Stops existing rust. Brown
DINITROL ML Cavity Protection
Characteristics:
• Brown
• Extremely Penetrating
• Stops ongoing corrosion
• Water displacing
• Oily, flexible film
• Wet in wet with bitumen UBC
Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and
exterior joints and crevices. The product can be used for rust-proofing of second-hand cars,
trucks, buses and other vehicles.
Method of use:
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
Technical properties:
Colour: brown
Type of film: oily, greasy
Density at 23°C: 860 kg/m³
Viscosity at 23°C, DIN 2: 60 s
Dry matter content: 46 % by weight
Flash point: 40°C
Aromatic content in solvent: < 1 %
Recommended film thickness wet: 30 μm
Recommended layer thickness: 10 μm
Drying time: 1 h
Low temperature adhesion: < - 40°C
Effect on car paint: none
Removability: White Spirit
Salt spray test: > 96 h
Penetration 50 μm gap: > 70 mm
Available in: 500 ML Spray can / 1 L Mini service / 5 L Pail /
20 L Pail / 60 L Drum / 208 L Drum / Container
Danger
Gasoline fraction (petroleum), hydrogenated heavy
H222 Extremely flammable aerosol. H229 Pressurized container: may burst when heated. H336 May cause drowsiness or dizziness.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P251 Do not puncture or burn even after use. P304+P340 IF INHALED: Move person to fresh air and keep in a position that facilitates breathing. P403+P233 Store in a well-ventilated place. Keep the package tightly closed. P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperature exceeding P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
EUH 066 Repeated exposure may cause skin dryness or cracking. EUH 208 Contains Calcium Sulfonate. May cause an allergic reaction.
Explosive mixtures can form without sufficient ventilation
DINITROL ML Cavity Protection
Characteristics:
• Brown
• Extremely Penetrating
• Stops ongoing corrosion
• Water displacing
• Oily, flexible film
• Wet in wet with bitumen UBC
Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and
exterior joints and crevices. The product can be used for rust-proofing of second-hand cars,
trucks, buses and other vehicles.
Method of use:
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
Technical properties:
Colour: brown
Type of film: oily, greasy
Density at 23°C: 860 kg/m³
Viscosity at 23°C, DIN 2: 60 s
Dry matter content: 46 % by weight
Flash point: 40°C
Aromatic content in solvent: < 1 %
Recommended film thickness wet: 30 μm
Recommended layer thickness: 10 μm
Drying time: 1 h
Low temperature adhesion: < - 40°C
Effect on car paint: none
Removability: White Spirit
Salt spray test: > 96 h
Penetration 50 μm gap: > 70 mm
Available in: 500 ML Spray can / 1 L Mini service / 5 L Pail /
20 L Pail / 60 L Drum / 208 L Drum / Container
Danger
Gasoline fraction (petroleum), hydrogenated heavy
H222 Extremely flammable aerosol. H229 Pressurized container: may burst when heated. H336 May cause drowsiness or dizziness.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P251 Do not puncture or burn even after use. P304+P340 IF INHALED: Move person to fresh air and keep in a position that facilitates breathing. P403+P233 Store in a well-ventilated place. Keep the package tightly closed. P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperature exceeding P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
EUH 066 Repeated exposure may cause skin dryness or cracking. EUH 208 Contains Calcium Sulfonate. May cause an allergic reaction.
Explosive mixtures can form without sufficient ventilation
| Product code | 11071 |
|---|---|
| EAN | 7314760110712 |
| Brand | Dinitrol |
Related products
Cookies
Cookie - Settings
Here you can customize your cookie settings according to your preferences.