DUPLI-COLOR Enamel Spay for quick and easy repair of irritating scratches or similar small damages on white enamel surfaces such as bath-tubs, sinks, toilet bowls, instanteous water-heaters, refrigerators etc. 

Not suitable for large-area repairs at wash-bowls, bathtubs etc.
 

QUALITY AND PROPERTIES

• High-grade acrylic quality
• For white glossy enamel surfaces
• Hard, durable surface
• Very good coverage
• Excellent adhesion
• Good flow, smooth surface
• Quick-drying
• Scratch-, shock- and impact-resistant

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Acrylic copolymers
• Colour: enamel-white
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  glossy: 80-85 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  12 ml for small spots
  200 ml are sufficient for approx. 0.4 m²
  400 ml are sufficient for approx. 0.8 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 5 minutes
  Cured: after approx. 2 hours
  Resilient: after approx. 48 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  Aerosols: 10 years, touch-up pencils: 5 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: touch-up pencils 12 ml, aerosol cans with maximum nominal volume 200 ml resp. 400 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Applicaton

Preparation of the ground:

• Remove loose parts, rust and dirt.
• The surface has to be clean, dry and free of fat.
• Slightly sand the damaged area and a small part of the surrounding surface.
• Remove abrasive dust.

Lacquering:

• The aerosol can should have room temperature.
• Before use shake the can vigorously for 2-3 minutes.
• Test colour of spray and compatibility of the lacquer at an invisible spot.
• Spray several thin cross-coats from a distance of approx. 25 cm.
• Do not spray over synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ORDER INFORMATIONS

Color	Product	Bundle	Art.No.
	Email Spray weiß 200	200 ml	684258
	Email Spray weiß 400	400 ml	467257
	Emaillack weiss 12	12 ml	334917