Dupli-Color Aluminium Primer Base Coat for Aluminum Surfaces Spray 400 ml

Special primer for aluminum parts when a subsequent topcoat is required.

Can be coated with all air-drying acrylic, nitro-combination, or synthetic paints, such as DUPLI-COLOR Auto-Spray or DUPLI-COLOR Lackspray.

It is recommended to use fine sandpaper on the aluminum surface before application.

Quality and Properties:

• Combination of nitro-combi and acrylic

• Promotes excellent adhesion between the aluminum substrate and the topcoat

• Suitable for aluminum, limited use on zinc and copper

• Good weather resistance

• Good flow, smooth surface

• Gloss level: matte

• Suitable for both indoor and outdoor applications

Physical and Chemical Properties:

• Binder Base: Combination of nitro-combi and acrylic

• Color: Gray

• Gloss level (measured at 60° according to DIN 67530): Matte, 5-10 gloss units

• Efficiency:

  • Depending on consistency and color of the substrate:

  • 400 ml can covers approx. 0.8 m² (one layer)

• Drying Time (at 20°C, 50% relative humidity):

  • Dust dry: approx. 15 minutes

  • Touch dry: approx. 30 minutes

  • Fully dry: approx. 2-4 hours

  • Drying time depends on ambient temperature, air humidity, and coating thickness.

• Storage Stability: 10 years with proper storage conditions (10°-25°C, max. 60% relative humidity)

• Packaging: Aerosol cans with a maximum volume of 400 ml

Instructions for Use:

• Most DUPLI-COLOR sprays have a safety ring or protective cap to prevent unauthorized use. See relevant instructions on the cap or label.

• Read and follow warning texts on the label before use!

Surface Preparation:

• Sand the surface dry with fine sandpaper (grain size 600).

• Remove sanding dust thoroughly.

• Clean, degrease, and dry the surface.

Primer Application:

• Shake the can for 2 minutes before use.

• Test spray on an inconspicuous area.

• Apply 2 - 3 thin layers from a distance of approx. 25 cm.

• After drying (approx. 2-4 hours), apply the topcoat.

• Can be overcoated with acrylic, nitro-combination, or synthetic paints.

Signal word Danger
hazardous components for labeling: acetone, butyl acetate, 2-Methoxy-1-methylethyl acetate
standard hazard statements
H222-H229 Extremely flammable aerosol. Pressurized container: may burst when heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long-lasting effects.
safety instructions
P101 If medical advice is needed, have the product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosols.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container in accordance with local regulations.
other data:
EUH066 Repeated exposure may cause skin dryness or cracking.
EUH208 Contains maleic anhydride, 4-morpholinecarbaldehyde. May cause an allergic reaction.
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosols or mist.