For numerous application possibilities. Special spray system, which is even used by famous graffiti artists. A broad range of the best-selling colours, mainly matching to RAL. Also available as clear coat.

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles. Also applicable for the designing of finery, concrete and natural stone.
 

QUALITY AND PROPERTIES

• High-grade nitro-combi quality
• Very good coverage
• Excellent adhesion on many surfaces
• Good flow, smooth surface
• Quick-drying
• Suitable for indoors and outdoors applications
• Polishable surface
• Weather-resistant, light-proof, UV-resistant
• Scratch-, shock- and impact-resistant

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: nitro-combi
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  glossy: 80 gloss units
  satin matt: 30-35 gloss units
  matt: 5-10 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 0.8-1.5 m² depending on colour
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Non-sticky: after approx. 15 minutes
  Dry to touch: after approx. 30 minutes
  Cured: after approx. 2 hours
  Can be polished after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

• The surface has to be clean, dry and free from fat.
• Remove residues of old paintings and rust, then sand and prime if necessary. Let dry for 1 - 2 hours.
• Use DUPLI-COLOR Pastic Primer on plastic parts.
• Cover areas not to be painted.
• Before use, shake the can for 3 minutes.
• Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
• Spray from a distance of approx. 25 cm several thin coats.
• Do not spray over synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Signal word: Danger
Hazardous components for labeling:
acetone
butyl acetate
2-Methoxy-1-methylethyl acetate
Standard hazard statements
H222-H229 Extremely flammable aerosol. The container is under pressure: it may rupture when heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Advice on safe handling
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on a naked flame or any incandescent material.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 ° C.
P501 Dispose of contents / container in accordance with local regulations.
More information:
EUH066 Repeated exposure may cause skin dryness or cracking.
Without adequate ventilation, explosive mixtures may be formed.