QUALITY AND PROPERTIES

• High-grade acrylic quality
• Very good coverage
• Excellent adhesion on many surface
• Also suitable for polystyrene
• Good flow, smooth surface
• Quick-drying
• Suitable for indoors and outdoors applications
• Resistant to wipint
• Weather-resistant
• Limited light-proof and UV-resistant. The intensity of luminosity decreases by-and-by. With a clear varnish coating you can delay this effect a bit.
• Scratch-, shock- and impact-resistant

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Acrylic copolymeres
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  matt: 5-10 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  150 ml are sufficient for approx. 0.3 - 0.4 m²
  400 ml are sufficient for approx. 0.8 - 1.0 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 15 minutes
  Dry to touch: after approx. 30 minutes
  Coatable: after approx. 1 - 2 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: touch up pencils 12 ml; aerosol cans with maximum nominal volume 150 ml resp. 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

• Remove rust and dirt.
• The ground has to be clean, dry and free from fat.
• Cover areas not to be painted.
• Apply a white primer, e.g. DUPLI-COLOR Primer white. (Not if used on polystyrene!)
• Before use, shake can for 3 minutes.
• Test spray at an invisible spot.
• Spray from a distance of 12-15 cm several thin coats.
• Do not spray over surfaces which are painted with synthetic resin lacquer!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ORDER INFORMATION

Color	Product	Bundle	Art.No.
	Neon blau 150	150 ml	880612
	Neon blau 400	400 ml	194856
	Neon grün 150	150 ml	626159
	Neon grün 400	400 ml	194825
	Neon pink 150	150 ml	626173
	Neon pink 400	400 ml	556944
	Neon signalrot 150	150 ml	626166
	Neon signalrot 400	400 ml	194832
	Neon zitronengelb 150	150 ml	626142
	Neon zitronengelb 400	400 ml	194818

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,