Dupli-Color Prima RAL 3000 Flame Red glossy Spray 500 ml
decorative lacquer with excellent coverage and filling properties to treat surfaces, treated and untreated, of wood, metal aluminium, glass, stone and various types of plastic. The lacquer has lasting colour and gloss, is rust preventive and resistant to petrol, chemicals and weather influences.
Wide range of applications. Suitable for wood, metal, paper, glass or hard plastics as well as for textiles. Also applicable to concrete and natural stone.
Properties:
- High-quality nitro-combination varnish
- Very good coverage
- Excellent grip on many surfaces
- Provides a smooth surface after application
- Quick-drying
- Suitable for indoor and outdoor use
- Polishable surface
- Resistant to weathering, light and UV radiation
- Scratch and impact resistant
Physical and chemical properties:
Binder base: nitro-combi
Color: Red traffic
Odor: solvent
Efficiency: Depending on the consistency and color of the surface: 400 ml is sufficient for approximately 0.8-1.5 m2 depending on the shade
Drying time (at 20 ° C, 50% relative humidity):
Dust resistant: approx. 10 minutes
Non-sticky: approximately 15 minutes
Touch dry: after about 30 minutes
Cured: after about 2 hours
It can be polished after approximately 24 hours
The drying time depends on the ambient temperature, the humidity and the thickness of the applied layer.
Temperature resistance: up to 80 ° C
Storage stability: 10 years if suitable storage areas are provided (= 10 ° -25 ° C, relative humidity max. 60%)
Size: aerosol, maximum volume 400 ml
Application:
The surface must be clean, dry and free of grease.
Remove old paint residues and rust, then sand and apply primer if necessary. Leave to dry for 1-2 hours.
Cover the unpainted surface with tape.
Shake the vial for 3 minutes before use.
We test the spray in an invisible place to check the compatibility of the spray with the original paint.
Spray several thin layers from a distance of approximately 25 cm.
Do not spray on synthetic paints!
Packaging: Spray 500 ml