Dupli-Color Prima RAL 3020 red glossy Spray 400 ml

QUALITY AND PROPERTIES

• High-grade acrylic quality
• Quick-drying
• Very good coverage
• Very good colour-matching
• Excellent adhesion on many surfaces
• Good flow, smooth surface
• Suitable for indoors and outdoors applications
• Polishable surface
• Weather-resistant, light-proof, UV-resistant
• Scratch-, shock- and impact-resistant
• Less runnings

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Acrylate copolymeres
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  gloss: >75 GU
• mat: 10 ±2 GU
  semi mat: 25 ±5 GU
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 0.8-1.3 m² depending on colour
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 12 minutes
  Tack free: after approx. 40 minutes
  Hardened/re-sprayable: after 2 hour
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

• Remove rust and dirt.
• The surface has to be clean, dry and free from fat.
• If necessary, apply a primer.
• Cover areas not to be painted.
• Before use, shake the can for 2-3 minutes.
• Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
• Apply from a distance of approx. 25 cm several thin coats.
• Do not paint on synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Signal word: Danger
acetone, n-butyl acetate, 2-methoxy-1-methylethyl acetate
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe spray. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents / container in accordance with regional regulations. EUH066 Repeated exposure may cause skin dryness or cracking. Buildup of explosive mixtures possible without sufficient ventilation. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist