DUPLI-COLOR Terracotta Effect is a quick-drying acrylic lacquer with a special, rough surface texture to produce Terracotta-similar effects.
Suitable for nearly every surface, e.g. metal, wood, glass, stone, ceramics, carton and many coatable hard plastics.

On plastics always use DUPLI-COLOR Plastic Primer art.no. 557163 as adhesion promoter.
 

QUALITY AND PROPERTIES

• High-grade nitro-combi quality with special, rough texture
• Excellent adhesion and coverage
• Good flow
• Quick-drying
• Suitable for painting and repair of indoors and outdoors objects
• Weather-resistant
• Excellent colour retention: (light-proof, UV-resistant)
• Excellently re-coatable

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Nitro-combi
• Colour: diverse
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  satin matt, not measurable due to rough texture
• Efficiency:
  Depending on consistence and color of the ground:
  150 ml are sufficient for approx. 0.3 - 0.5 m²
  400 ml are sufficient for approx. 0.8 - 1.2 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 50 minutes
  Cured: after approx. 3 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans with maximum nominal volume of 150 ml resp. 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Preparation of the ground:

• Clean underground from dirt and fat.
• Derust metals.
• On plastic parts always use DUPLI-COLOR Plastic Primer; on other surfaces use DUPLI-COLOR Primer or Universal Primer.
• Fill and sand uneven surfaces. Let dry.

Lacquering:

• The surface has to be clean, dry and free from fat.
• Mask off areas not to be painted.
• Before use, shake the can vigorously for 3 minutes.
• Test spray to check colour-matching and compatibility.
• Spray several thin coats in 3 - 5 minute intervals.
• Spray from a distance of approx. 25 cm.
• Terracotta Effect can be re-coated with any DUPLI-COLOR spray paint. Depending on thicknes of the applied coat, the intensity of the achieved structure can degrease.
• Do not spray over synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Color	Product	Bundle	Art.No.
	Terracotta manganbraun 150	150 ml	743634
	Terracotta manganbraun 400	400 ml	706981
	Terracotta orientrot 150	150 ml	743665
	Terracotta saharagelb 150	150 ml	743641
	Terracotta samtblau 150	150 ml	743658

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,