Dupli-Color Tuning Neon red spray paint 400ml
  • Dupli-Color Tuning Neon red spray paint 400ml
  • Dupli-Color Tuning Neon red spray paint 400ml
  • Dupli-Color Tuning Neon red spray paint 400ml

Dupli-Color Tuning Neon red spray paint 400ml

7,36 /pcs
6,08excluding VAT
Sold out
  • Detailed description
  • Parameters
  • Brand
  • Rating (0)
  • Discussion

Fluorescent colours for the painting of all kinds of vehicle parts, even on motor cycles and bicycles. Suitable for: metal, coatable hard plastics.

(In Germany not permitted on all car parts, please attend the local traffic regulations!). 

Also suitable for use on polystyrene.

DUPLI-COLOR Neon colours need a white ground to have highest luminosity, therefore please prime with DUPLI-COLOR Primer white art.no. 191282. Do not use a primer in case of use on polystyrene!
 

QUALITY AND PROPERTIES

  • High-grade acrylic quality
  • Very good coverage
  • Excellent adhesion on nearly any surface
  • Also suitable for use on polystyrene
  • Good flow, smooth surface
  • Quick-drying
  • Suitable for indoors and outdoors applications
  • Resistant to wipint
  • Weather-resistant
  • Limited light-proof and UV-resistant. The intensity of luminosity decreases by-and-by. With a clear varnish coating you can delay this effect a bit.
  • Scratch-, shock- and impact-resistant

PHYSICAL AND CHEMICAL DATA

  • Basis of the binder: Acrylate co-polymere
  • Colour: diverse
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    matt: 5-10 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    150 ml are sufficient for approx. 0.3 - 0.4 m²
    400 ml are sufficient for approx. 0.8 - 1.0 m²
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 15 minutes
    Dry to touch: after approx. 30 minutes
    Coatable: after approx. 1 - 2 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 150 ml resp. 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

  • Remove rust and dirt.
  • The ground has to be clean, dry and free from fat.
  • Cover areas not to be painted.
  • Apply a white primer, e.g. DUPLI-COLOR Primer white. (Not if applied on polystyrene!)
  • Before use, shake can for 3 minutes.
  • Test spray at an invisible spot.
  • Spray from a distance of 12-15 cm several thin coats.
  • Do not spray over surfaces which are painted with synthetic resin lacquer!
 

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ORDER INFORMATION

 Color   Product   Bundle   Art.No. 
 NEON blue 150   150 ml   566295 
 NEON green 150   150 ml   566288 
 NEON orange 150   150 ml   133534 
 NEON orange 400   400 ml   191657 
 NEON pink 150   150 ml   566271 
 NEON red 150   150 ml   133848 
 NEON red 400   400 ml   191879 
 NEON yellow 150   150 ml   133558 
 NEON yellow 400   400 ml   191664 
 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Product code 191879
EAN 4048500191879
Brand Motip

0 reviews and 0 user reviews

  • 5 0x
  • 4 0x
  • 3 0x
  • 2 0x
  • 1 0x
Nobody has yet rated.
Be the first to write a review for this product.
Do you have a question about the product? Ask a question to our pros.

Nobody has asked anything yet.
Spinner
Cookies Cookies

We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.