Grand Prix heat-resistant black spray 400 ml

Grand Prix Heat-Resistant Black Spray 400 ml

Product description:
Grand Prix heat-resistant black spray is a special coating designed for surfaces exposed to high temperatures. Based on silicone resin, it creates a matte and durable finish that withstands temperatures up to 650 °C. After curing, it becomes resistant to water, petrol, chemicals, and weather conditions.

Key features:

• Heat resistance up to 650 °C

• Matte black finish (5–10 gloss units at 60°)

• Excellent coverage and filling capacity

• Very good adhesion

• Fast drying

• Water-resistant

• Resistant to petrol, chemicals, and weather after curing

• Smooth surface with good flow

Recommended uses:

• Exhaust systems, engines, barbecues, fireplaces, stoves, ovens

• Suitable for indoor and outdoor use

Instructions for use:

1. Remove old paint and rust, sand the surface

2. Make sure the surface is clean, dry, and degreased

3. Do not use primer – apply directly to bare metal

4. Shake the can well for at least 2 minutes

5. Apply several thin coats from a distance of 25–30 cm (interval 2 minutes)

6. Allow to dry at 20 °C for approx. 1 hour

7. Cure the painted object by heating to 160 °C for 1 hour

8. The thinner the coating, the higher the heat resistance

Coverage:

• One 400 ml can covers approx. 1.2–1.75 m² (depending on substrate)

Storage:

• Up to 10 years if stored at 10–25 °C and max. 60 % humidity

GHS – Safety information

Signal word: Danger
· Hazardous components for labeling:
Hydrocarbons C6–C7, n-alkanes, isoalkanes, cyclics; < 5% n-hexane
Hydrocarbons, C9, aromatics
n-butanol
· Hazard statements
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long-lasting effects.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container in accordance with local regulations.
· Additional information:
Without sufficient ventilation, explosive mixtures may form.
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosol or mist.