We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.
High temperature resistance:
Black, dark anthracite, anthracite, silver, white
Excellent covering and filling properties
Outstanding adhesion
Good flow and flat surface
Fast drying
Water resistant
After curing, resistant to fuel, chemicals, and weather influences
Binder base: Silicone resin
Color: Various
Odor: Solvent
Gloss level (measured at 60° angle according to DIN 67530):
Matte: 5–10 gloss units
Silver: cannot be measured, metallic paint
Yield:
Depending on surface condition and color:
400 ml is sufficient for approx. 1.2 m² – 1.75 m²
Drying time (at 20°C, 50% relative humidity):
Dust-dry: after 5–10 minutes
Touch-dry: after 10–25 minutes
Heat resistant and flexible: after 1 additional hour of curing at approx. 160°C
Heat-resistant colors:
Black, silver, white, dark anthracite, anthracite
Storage stability:
Aerosols: 10 years if stored properly (10°–25°C, max. 60% rel. humidity)
Size:
Aerosol, max volume 400 ml
Read and follow all warning labels carefully before use!
Surface preparation:
Remove old paint and rust, then sand the surface.
The surface must be clean, dry, and free of grease.
Do not use primer! Best results are achieved on bare metal.
Painting:
Mask off untreated surrounding areas.
Shake the can vigorously for 2 minutes before use.
Test spray on an inconspicuous area to check compatibility.
Apply several thin coats at 2-minute intervals.
Spray from a distance of 25–30 cm.
Best results at ambient temperature of 20°C.
No primer required. Apply directly to bare metal for optimal results.
Allow to dry for 1 hour.
Then heat the coated surface for 1 hour (160°C) to fully cure.
The thinner the coat, the higher the temperature resistance.
Signal word: Danger
Hazardous components for labeling:
Hydrocarbons C6-C7, n-alkanes, isoalkanes, cyclics; < 5% n-hexane
Hydrocarbons, C9, aromatics
n-butanol
Hazard statements:
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C.
P501 Dispose of contents/container in accordance with local regulations.
Additional information:
Without adequate ventilation, explosive mixtures may form.
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosol or mist.
Product code | 080013 |
---|---|
EAN | 8711347211449 |
Brand | Motip |