Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml
  • Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml
  • Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml
  • Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml
  • Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml

Motip Acrylic quick-drying Paint RAL 9010 White satin mat spray 400ml

7,02 /pcs
5,80excluding VAT
In stock (5 or more pcs)
  • Detailed description
  • Parameters
  • Brand
  • Rating (0)
  • Discussion
This is a high-quality fast-drying acrylic lacquer system with excellent coverage in RAL standard colours.
Colour-exact lacquers and lacquer repairs to small areas available in high-gloss, semi-matt or matt colours for industrial and professional users.
For use on treated and untreated wood, metal, aluminium, glass, stone and various plastic surfaces.
We recommend pre-treating galvanised and untreated steel with MoTip Industrial Zinc Spray or MoTip Industrial Alu Zinc Spray.
 

QUALITY AND PROPERTIES

  • High-grade acrylic quality
  • Fast drying time
  • Very good coverage
  • Colour exact
  • Excellent adhesion to several materials
  • Long-lasting shine
  • Good corrosion protection
  • Good flow, smooth surface
  • Ideally suited to spot welding
  • Weatherproof, lightfast, UV resistant
  • Scratch, shock and impact proof

PHYSICAL AND CHEMICAL DATA

  • Basis of the binder: acrylic
  • Colourdiverse
  • Smell: solvent
  • Degree of gloss: (at measurement angle 60° acc. to DIN 67530):
    glossy: 80 gloss units
    satin mat: 30-35 gloss units
    mat: 5-10 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    12 ml for small spots
    400 ml are sufficient for approx. 1.0 - 2.0 m²
  • Drying time (at 20°C, 50% relative air humidity):
    12 ml:
    Dust-dry: after approx. 15 minutes
    Dry to touch: after approx. 60 minutes
    400 ml:
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Hard-dry: after approx. 2 hours
    Polishable: after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature resistance: up to 80°C
  • Storage stability:
    Aerosols: 10 years, touch-up pencils: 5 years, if appropriate
    storage provided (=10°-25°C, relative air humidity of max.
    60%)
  • Size:
    touch-up pencils 12 ml,
    aerosol cans, maximum nominal volume 400 ml

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Pre-treatment of surface:

  • The surface should be clean, dry and free of grease.
  • Sand old paintwork and coated parts first.
  • Pre prime.
  • Once dry, sand with 600-grit sandpaper.

Painting:

  • The surface should be clean, dry and free of grease.
  • Bring can to room temperature.
  • Operating temperature 15 to 25°C.
  • Shake can for 2 minutes before use.
  • Test on inconspicuous area.
  • Keep a spraying distance of ca. 25-30 cm.
  • Apply several thin layers.
  • Shake can from time to time during use.
  • Do not spray on surfaces coated with synthetic resins!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Signal word: Danger. acetone butyl acetate 2-Methoxy-1-methylethyl acetate
Hazard statements H222-H229 Extremely flammable aerosol. The container is under pressure: it may burst when heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.
Precautionary statements P101 If medical attention is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P211 Do not spray on open flames or other sources of ignition. P251 Do not puncture or burn even after use. P260 Do not breathe aerosols. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C. P501 Dispose of contents / container in accordance with local regulations.
Additional information: EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures can form without sufficient ventilation.

Product code 07166
EAN 8711347129119
Brand Motip

0 reviews and 0 user reviews

  • 5 0x
  • 4 0x
  • 3 0x
  • 2 0x
  • 1 0x
Nobody has yet rated.
Be the first to write a review for this product.
Do you have a question about the product? Ask a question to our pros.

Nobody has asked anything yet.
Spinner
Cookies Cookies

We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.