Motip Acrylic Universal Primer grey spray 500 ml

Technical Information:
Fast drying spray filler with excellent filling properties and coverage for professional use. To fill small irregularities in surfaces, treated and untreated, of wood, metal and aluminium. Spray filler has excellent adhesion and is rust preventive. MOTIP Industrial Spray Filler is easy to sand, both wet and dry (from grain 400).

Quality & properties:
Fast drying Excellent filling property and coverage Easy to sand, both wet and dry (from grain 400) Corrosion preventive Excellent adhesion

Physical & chemical data Base:
Acrylic resin Colourname: Beige Grey Degree of gloss: mat, 10 ±2 GU Efficiency: 500 ML – 1,5 - 2 m² Dry to touch: 10 - 20 min Dust dry: 5 - 10 min Completely dry: 120 min Overcoatable: 120 min Surfaces: wood, metal and aluminium Minimum Working Temperature: 15 °C Maximum Working Temperature: 25 °C Vapour pressure: 3500/20 Flash point: n.a. Temperature Resistance: Beige Grey – 110 °C Storage stability: 10 years Content: 500 ML

How to use:
Before use, carefully read the directions on the packaging and act accordingly. The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre. Apply the spray filler in several thin layers. Before applying the next layer, again shake the aerosol. After hardening sand, either wet or dry (grain 400). Before applying a finishing coat, apply a primer. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds). The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.