QUALITY AND PROPERTIES

• Innovative one-hand safety cap with spray trigger lock prevents unintentional spraying - now with Easy-touch release
• Special tilt valve for accurate wall and floor markings
• Outstanding adhesion also to wet surfaces
• Markings remain strongly visible from 9 to 12 months
• High coverage quality ensures high yield of up to 250 m
• Intensive luminosity of the fluorescent hues
• Also easy to apply with gloves
• Clean, drip-free marking
• Cap acceptable for special applications (for use in accessories)
• Environmentally friendly and non-hazardous to health
• Self-cleaning system, can be 100% emptied by spraying --> no venting required

PHYSICAL AND CHEMICAL DATA

• Colours: fluorescent: pink, red, orange, yellow, green, blue; non-fluo: white, yellow, red, black
• Storage stability:
  Aerosols: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Efficiency:
  Depending on consistence and color of the ground 500 ml are sufficient for approximately 250-300 m
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 30 minutes
  Cured: after approx. 24 hours
  Coatable: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Size: aerosol cans, maximum nominal volume 500 ml

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

• Test spray at an invisible spot.
• Spray distance approx. 5-15 cm.
• Apply the desired marking.
• Only conditionally applicable on mineral substrates.