Motip Effect Frigo White Spray 400 ml

With MoTip Frigo White, minor scratches and similar damage to enamel surfaces such as bathtubs, washbasins, toilets, water heaters, refrigerators, etc. can be easily and quickly repaired.

Not recommended for extensive bath and washbasin repairs.


QUALITY AND CHARACTERISTICS
High quality synthetic resin
For white glossy enamel surfaces
Strong, durable surface
Very good hiding power
Excellent grip
Good flow, smooth surface
Quick-drying
Scratch and impact resistant

PHYSICAL AND CHEMICAL PROPERTIES
Binder base: Alkyd resin
Color: Enamel white
Odor: solvent
Gloss level: at a measuring angle of 60 ° according to DIN 67530
gloss: 80-85 GU
Spreading capacity:
Depending on the consistency and color of the surface:
400 ml is sufficient for approximately 1.2 m²
Drying time (at 20 ° C, 50% relative humidity):
Non-sticky: after 4 hours
Touch dry: approx. 24 hours
The drying time depends on the ambient temperature, the humidity and the thickness of the applied coat.
Temperature resistance: up to 80 ° C
Storage stability:
10 years if suitable storage space is provided (= 10 ° -25 ° C, relative humidity max. 60%)
Size:
Aerosol, maximum volume 400 ml

INSTRUCTIONS FOR USE
Read and follow the warning text on the label carefully before use!

Surface preparation:

Remove the peeling off old paint, rust and dirt.
The surface must be clean, dry and free of grease.
Sand the surface to be treated and the surrounding area with sandpaper.
Clean the surface from dust after grinding.
Painting:

Place the vial at room temperature.
Operating temperature 15 to 25 ° C.
Shake the vial for 2 minutes before use.
Test the spray compatibility with the surface to be treated in an invisible place.
Spray several thin layers from a distance of approximately 25 cm.
Do not use acrylic or nitro-combination varnishes on the painted surface even after drying!

ENVIRONMENT AND LABELS
Environmentally friendly: MOTIP DUPLI products are 100% heavy metal free. Lids and packaging are made of recyclable materials.

Waste disposal: Mix waste and contaminated packaging as hazardous waste. Cleaned packaging can be handed over for recycling.

Packaging Marking: All MOTIP DUPLI products are in accordance with current Czech and EU regulations concerning packaging marking. These are the current versions of the following regulations:

Act No. 350/2011 Coll. on Chemical Substances and Chemical Mixtures and on Amendments to Certain Acts (Chemical Act).
Regulation (EC) No 1272/2008 of the European Parliament and of the Council on classification, labeling and packaging of substances and mixtures (CLP).
Government Regulation No. 194/2001 Coll., Laying down technical requirements for aerosol dispensers (in case of aerosol)
Directive 75/324 / EEC (ADD) - in the case of aerosol
The safety data sheets for MOTIP DUPLI products are in accordance with REACH Regulation 1907/2006 / EC, Article 31, Annex II.