QUALITY AND PROPERTIES

• Good cathodical corrosion protection
• Good filling power
• Fast drying time
• Excellent adhesion
• Spot weldable
• Resistant to petrol, chemicals and weather conditions

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Expoxy-ester
• Colour: grey
• Efficiency:
  Depending on consistence and color of the ground:
  500 ml are sufficient for approx. 1.5 - 2.0 m²
• Drying time (at 20°C, 50% relative air humidity)
  Dust-dry: after approx. 10 - 15 minutes
  Tack-free: after approx. 20 - 30 minutes
  Cured/Overworkable: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature resistance: up to 350°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  aerosol cans, maximum nominal volume 500 ml

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Pre-treating surface:

• The surface should be clean, dry and free of grease.
• Sand old paintwork and painted parts, first.

Painting:

• The surface should be clean, dry and free of grease.
• Bring the can to room temperature.
• Operating temperature 15 to 25°C.
• Shake can for 2 minutes before use.
• Test on an inconspicuous area.
• Keep a spraying distance of 25-30 cm.
• Apply several thin coats.
• During use, shake can from time to time.
• After use, turn can upside down and spray empty to clean valve.
• Can be primed and painted once dry, if needed.