QUALITY AND PROPERTIES

• High-grade acrylic quality
• Excellent adhesion
• Good flow, smooth surface
• Excellent gloss stability
• Hard surface, good elasticity
• Quick-drying
• Light-proof, UV-proof (non-yellowing)
• Resistant to weathering, dirt-repellent
• Scratch-, shock- and impact-resistant
• After curing resistant to water, dilluted acids and bases
• Limited fuel-resistant

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: acrylic resin
• Colour: colourless
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  glossy: 80-90 gloss units
  matt: approx. 15 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  150 ml are sufficient for approx. 0.5 m²
  500 ml are sufficient for approx. 1.5-2.0 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 5-10 minutes
  Tack-free: after approx. 10-20 minutes
  Coutable: after approx. 2 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 110°C
• Storage stability:
  Aerosols: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  aerosol cans with maximum nominal volume 150 ml resp. 500 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Anwendung:

• Die vorherige Lackierung mind. 30 Minuten trocknen lassen.
• Klarlackdose vor Gebrauch 2  Minuten schütteln.
• Aus ca. 25-30 cm Abstand mehrere dünne Schichten aufsprühen.
• Sprühnebel nach 24 Stunden mit presto Polier- und Schleifpaste wegpolieren.
• Nicht auf mit Kunstharz lackierte Flächen sprühen!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ORDER INFORMATIONS

Color	Product	Bundle	Art.No.
	Klarlack glzd. 500	500 ml	04009
	Klarlack matt 500	500 ml	04000
	Motip Klarlack gl. 150	150 ml	02001

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Danger
n-butanol Hydrocarbons, C9, aromatics xylene Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane
H222-H229 Extremely flammable aerosol. The container is under pressure: it may burst when heated. H315 Irritating to skin. H318 Causes serious eye damage. H335-H336 May cause respiratory irritation. May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects
P101 If medical attention is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P211 Do not spray on open flames or other sources of ignition. P251 Do not puncture or burn even after use. P260 Do not breathe aerosols. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C. P501 Dispose of contents / container in accordance with local regulations.
Explosive mixtures can form without sufficient ventilation.