MOTIP Sealing Spray grey 500ml

MOTIP Sealing Spray is an easy to use flexible coating to seal and fill small leaks and cracks. It maintains its flexibility even with temperature changes and is suitable to use on different substrates, such as, metal, plastic, PVC, concrete, and vinyl. Sealing Spray can be used indoor and outdoor and is therefore ideal to seal small leaks and cracks on gutters, ventilations, drains and similar. MOTIP Sealing Spray is weatherproof, UV-resistant and over-paintable with different paint systems.
3 COLOURS
500 ML

CHARACTERISTICS
Waterproof
Flexible
High filling properties
Weather- and UV-resistant
Over-paintable with different paint systems
User-friendly
For indoor and outdoor use

Physical & chemical data
Base: Synthetic resin
Colourname:
black
grey
white
Smell: Characteristic
Degree of gloss: mat, 10 ±2
Dry to touch: 20-30 min
Dust dry: 10-20 min
Overcoatable: 24 h
Surfaces: Metal, plastic, PVC, concrete, vinyl
Minimum Working Temperature: 10 °C
Maximum Working Temperature: 25 °C
Vapour pressure: 4000/20 bar
Flash point: n.a.
Content: 500 ML

USAGE INSTRUCTIONS
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and lightly sand the surface. Clean and dry the surface again.

The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimeter.

Apply a first layer and let it dry for approximately 20 to 25 minutes.

Then apply a second layer, allow to dry for 5 minutes and check if the surface is sealed. If not, apply another layer. Before applying the next layer, again shake the aerosol. Allow a drying time of 5 minutes between the different layers.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the layer applied.