QUALITY AND PROPERTIES

• Easy to use
• Long-lasting shine and durable colour
• Flexible
• Excellent adhesion
• Keeps original structure

PHYSICAL AND CHEMICAL DATA

• Basis of the binder: Nitro- combi resin
• Colour: black
• Smell: solvent
• Degree of gloss: (at measurement angle 60° acc. to DIN 67530):
  satin glossy: 30-35 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 1.25 - 1.75 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 5-10 minutes
  Tack-free: after approx. 10-20 minutes
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature resistance: up to 110°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  aerosol can, maximum nominal volume 400 ml

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Application:

• The surface should be clean, dry and free of grease.
• Shake the can well for 2 minutes before use.
• Test compatibility on an inconspicuous area.
• Keep spraying distance of ca. 25-30 cm.
• Spray several thin coats of vinyl spray.

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,