Motip Deco paint RAL 9005 matt 100 ml

Motip Deco Paint RAL 9005 Matt 100 ml

Decorative lacquer with excellent coverage and filling properties to treat surfaces, treated and untreated, of wood, metal aluminium, glass, stone and various types of plastic. The lacquer has lasting colour and gloss, is rust preventive and resistant to petrol, chemicals and weather influences.

MoTip Deco Paint Lacquer is available in high gloss, satin matt and matt colours. 

Motip Deco RAL 9005 matt deep black - matt black color 100 ml

Quality and features
High quality alkyd paint in a can
Quick-drying
Suitable for indoor and outdoor applications
Good covering and filling properties
Good color and gloss retention
Resistant to weathering, light and UV radiation
Excellent flow on flat surfaces
Good adhesion to almost all surfaces (wood, metal, glass, stone and most plastics)
Scratch, shock and impact resistant
Physical and chemical properties:
Binder base: Alkyd resin
Color: many RAL shades and special colors
Odor: solvent
Gloss level (at measurement angle 60 ° according to DIN 67530):
Gloss: 85-90 gloss units
satin: 30-35 gloss units
Matt: 10-15 gloss units
Drying time (at 20 ° C, 50% relative humidity):
Dust resistant: approx. 30 minutes
Non-sticky: after about 4 hours
Cured: approximately after 24 hours
Additional coating: within 2 hours or approximately after 24 hours
The drying time depends on the ambient temperature, the humidity and the thickness of the applied coat.
Temperature resistance: up to 80 ° C
Storage stability:
Aerosol: 10 years provided suitable storage facilities are provided (= 10 ° -25 ° C, relative humidity max. 60%)
Size: can of 100 ml

Instructions for Use:
Read and follow the warning text on the label carefully before use! "

Application

Surface preparation:

The surface must be clean, dry and free of grease.
Remove loose flakes of old paint and remove rust, then sand the surface and apply primer.
Use plastic base for plastic parts.
Allow to dry for 2 - 4 hours.
Painting:

Tape the surface you do not wish to treat with tape.
Stir the can for 3 minutes before use.
Test the hue and color compatibility in an inconspicuous spot.
Apply the required number of layers at 10 minute intervals.
The next coat can be applied within 2 hours or at the earliest after 24 hours
Do not apply acrylic lacquer - even after curing!
Packaging: can 100ml